SHOP FOR
http://base-store.storehippo.com/
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. 560104 Bangalore IN
Tenettech E-Store
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage. Bangalore, IN
+918023404924 https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/webp/59dafe26aef6e1d20402c4c3-480x480.png" info@tenettech.com
60f504cd11a8655bf8c0522d Adafruit Accessories STEMMA Wired Tactile Push-Button Pack - 5 Color Pack https://cdn1.storehippo.com/s/59c9e4669bd3e7c70c5f5e6c/60f504cd11a8655bf8c0522f/webp/4431_spl.png

STEMMA Wired Tactile Push-Button Pack

Adafruit STEMMA Wired Tactile Push-Button Pack is colorful round tactile button switches that are already assembled onto a PCB. Each switch comes with a candy-colored round cap snapped on and has a pull-up resistor installed. The pack comes with one of each color of caps (blue, white, yellow, red, and black). The pins are normally open (disconnected), and when the button is pressed, they are momentarily closed. Each push-button board comes with a JST-PH 2mm connector and a matching JST PH 3-Pin to male header cable (200mm) to make wiring easy. The user simply plugs the cable in and then uses the black wire to connect to a microcontroller/microcomputer ground. The white wire is connected to the input signal pin. The red wire can be connected to the power pin (3V or 5V) if the user wants to have the pull-up resistor activated.

TT-MU-485-4431
in stock INR 728
1 1

Adafruit Accessories STEMMA Wired Tactile Push-Button Pack - 5 Color Pack

Sku: TT-MU-485-4431
₹728


Sold By: tenettech
Features
  • Shipping in 10-12 Working Days

Description of product

STEMMA Wired Tactile Push-Button Pack

Adafruit STEMMA Wired Tactile Push-Button Pack is colorful round tactile button switches that are already assembled onto a PCB. Each switch comes with a candy-colored round cap snapped on and has a pull-up resistor installed. The pack comes with one of each color of caps (blue, white, yellow, red, and black). The pins are normally open (disconnected), and when the button is pressed, they are momentarily closed. Each push-button board comes with a JST-PH 2mm connector and a matching JST PH 3-Pin to male header cable (200mm) to make wiring easy. The user simply plugs the cable in and then uses the black wire to connect to a microcontroller/microcomputer ground. The white wire is connected to the input signal pin. The red wire can be connected to the power pin (3V or 5V) if the user wants to have the pull-up resistor activated.