http://base-store.storehippo.com/
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage.
560104
Bangalore
IN
Tenettech E-Store
http://base-store.storehippo.com/
# 2514/U, 7th 'A' Main Road, Opp. to BBMP Swimming Pool, Hampinagar, Vijayanagar 2nd Stage.
Bangalore,
IN
+918023404924
//d2pyicwmjx3wii.cloudfront.net/s/59c9e4669bd3e7c70c5f5e6c/ms.settings/5256837ccc4abf1d39000001/webp/59dafe26aef6e1d20402c4c3-480x480.png"
[email protected]
6017c123d205c76307ca1f68
PIC16F688 Flash 4kbyte 8MHz Microcontroller with ADC and USART
//d2pyicwmjx3wii.cloudfront.net/s/59c9e4669bd3e7c70c5f5e6c/60715f63a46f25c3f5398a60/webp/ic-chips-ec.jpg
PIC16F688 - 14-pin Flash 4kbyte 8MHz Microcontroller with ADC and USART
Specifications
-
14-pin Microcontroller with USART
-
Flash Program Memory: 4096 bytes
-
EEPROM Data Memory: 256 bytes
-
SRAM Data Memory: 256 bytes
-
I/O Pins: 12
-
Timers: One 8-bit / One 16-bit
-
A/D Converter: 10-bit 8-Channel
-
Analog Comparator: 2
-
Internal Oscillator: 8MHz
Feature
-
High-Performance RISC CPU:
-
Only 35 Instructions to Learn:
-
All single-cycle instructions except branches
-
Operating Speed:
-
DC – 20 MHz oscillator/clock input
-
DC – 200 ns instruction cycle
-
Interrupt Capability
-
8-level Deep Hardware Stack
-
Direct, Indirect and Relative Addressing modes
-
Special Microcontroller Features:
-
Precision Internal Oscillator:
-
Factory calibrated to ±1%
-
Software selectable frequency range of 8 MHz to 125 kHz
-
Software tunable
-
Two-Speed Start-Up mode
-
Crystal fail detect for critical applications
-
Clock mode switching during operation for power savings
-
Power-Saving Sleep mode
-
Wide Operating Voltage Range (2.0V-5.5V)
-
Industrial and Extended Temperature Range
-
Power-on Reset (POR)
-
Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
-
Brown-out Reset (BOR) with Software Control Option
-
Enhanced Low-Current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable
-
Multiplexed Master Clear with Weak Pull-up or Input Only Pin
-
Programmable Code Protection
-
High-Endurance Flash/EEPROM Cell:
-
100,000 write Flash endurance
-
1,000,000 write EEPROM endurance
-
Flash/Data EEPROM retention: > 40 years
-
Low-Power Features:
-
Standby Current:
-
Operating Current:
-
11 μA @ 32 kHz, 2.0V, typical
-
220 μA @ 4 MHz, 2.0V, typical
-
Watchdog Timer Current:
-
Peripheral Features:
-
12 I/O Pins with Individual Direction Control:
-
High-current source/sink for direct LED drive
-
Interrupt-on-change pin
-
Individually programmable weak pull-ups
-
Ultra Low-Power Wake-up
-
Analog Comparator module with:
-
Two analog comparators
-
Programmable On-chip Voltage Reference (CVREF) module (% of VDD)
-
Comparator inputs and outputs externally accessible
-
A/D Converter:
-
10-bit resolution and 8 channels
-
Timer0: 8-bit Timer/Counter with 8-bit Programmable Prescaler
-
Enhanced Timer1:
-
16-bit timer/counter with prescaler
-
External Timer1 Gate (count enable)
-
Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator if INTOSC mode selected
-
Enhanced USART Module:
-
Supports RS-485, RS-232, LIN 2.0/2.1 and J2602
-
Auto-Baud Detect
-
Auto-wake-up on Start bit
-
In-Circuit Serial Programming™ (ICSP™) via two pins
*Image shown is a representation only.
TT-ECK-3236
in stock
INR
165.2
ELECTRON COMPONENT
1
1